Description
PA 600 Industrial Ozone Generator
MANUAL
FEATURES AND SPECIFICATIONS
- An easily programmed timer
- 600 milligrams of Ozone per hour (measured with free air not pure O2 input)
- Beige Hammertone scratch resistant aluminum cabinet
- Low maintenance parallel plate generators powered by 5000-volt heavy duty transformer
- Size: 14” long, 9” wide, 5.5” high. (36cm long x 23cm wide x 14cm high)
- Weight: 10 lbs (5 kg)
- Fan: 105 CFM. (3.0 m³/min)
- Power Requirement: 120 volt/53 watt/60 hertz
- Warranty: 2-year warranty
OZONE LEVEL CONTROL
- Review the FORMULA below and then:
- Set OZONE to desired setting
- Set TIMER to the desired setting
- Plug the unit into any convenient wall socket
- Switch the power to ON
- Monitor odor level and adjust output as required to control
The following formula and chart is suggested as a general guideline only. Use of the formula and chart will enable the user to determine the approximate milligrams per hour (MG/HR) of ozone required to odor situations. Ozone output will vary substantially with changes in temperature and humidity. AREA x ODOR FACTOR = MG/HR required PA600 MG/HR (Milligrams per hour in dry air)
| OZONE OUTPUT AT SETTING
190 234 277 321 364 408 451 495 538 582 625
LO 1 2 3 4 5 6 7 8 9 HI |
CUBIC METERS
- Measure the Cubic Meters (L x W x H) of the AREA being treated
- Estimate the ODOR FACTOR as follows: Light Odor Factor = 0.18 Medium Odor Factor = 0.65 Strong Odor Factor = 1.29
- Multiply the AREA by the ODOR FACTOR to determine the MG/HR on the chart below
- Set OZONE on the machine to the setting nearest the required MG/HR and adjust as required.
|
CUBIC FEET
- Measure the Cubic Footage (L x W x H) of the AREA being treated
- Estimate the ODOR FACTOR as follows: Light Odor Factor = 0.005 Medium Odor Factor = 0.018 Strong Odor Factor = 0.036
- Multiply the AREA by the ODOR FACTOR to determine the MG/HR on the chart below
- Set OZONE on the machine to the setting nearest the required MG/HR and adjust as required.
|
| Example:
285 cubic meter room x 1.29 Strong Odor Factor = 368 MG/HR. Set OZONE at 4 (364 MG/HR) and adjust as required. |
Example:
10,000 cubic foot room x 0.036 Strong Odor Factor = 360 MG/HR. Set OZONE at 4 (364 MG/HR) and adjust as required. |
|
| OTHER APPLICATIONS TIME OZONE
Now Car Freshening 1 HR. HI
Used Car Deodorizing 2 HR. HI
(In extreme cases, 2 to 4 consecutive daily automobile treatments may be required).
Taxi/Limousine Deodorizing 2 HR. HI
Bus Deodorizing 4 HR. HI
Paint Odor Removal 4 – 6 HR LO ‑ HI
New Carpet Odor Removal 2 ‑ 4 HR 6 – HI
Room freshening (up to 400 sq.ft.) 15 min. 6 ‑ HI
Hotel Suite (up to 800 sq.ft.) 30 min. 6 ‑ HI
Mold, Mildew, Heavy Room Odors 1 HR. HI
Conference Room (up to 2000 sq.ft.) 2 HR. 4 ‑ HI
Restaurant/Bar/Lounge after hours 4 HR. HI
|
|
Reviews
There are no reviews yet.